Modular suction dryer

SPD series

Modular suction dryer

The modular adsorption dryer has the characteristics of beautiful appearance, reasonable structure, excellent adsorption material, simple control, good adsorption effect, small pressure drop loss, high safety, and simple maintenance.

Good adsorption effect: The modular adsorption dryer adopts a scientific fluid distribution design, which slows down the flow rate of gas in the adsorption chamber, increases the contact area and time between gas and molecular sieve, and makes the adsorption more thorough.

Small pressure drop loss: Added inlet and outlet buffer chambers, allowing air flow to form convection through the adsorption chamber through the inlet and outlet buffer chambers, thereby reducing pressure drop. Small footprint, light weight, easy transportation and installation, more visual operation, intelligent, and convenient maintenance; Adopting a modular structure, each mold is less than 30L, not a pressure vessel, does not require annual inspection, safe, and reassuring; Only 1/3 of the adsorbent in the twin tower dehumidifier is needed to achieve double the adsorption effect without producing tunneling effect.

Super strong adsorption: using composite molecular sieves with stronger adsorption capacity, capable of achieving instantaneous adsorption and emission;

Structural advantages: Made of aluminum alloy material, the body will not rust, making it easy to maintain and replace spare parts in the later stage;

Size: A single machine can process compressed air from 05m3/min to 30m3/min. When encountering high flow air compressors, they can be connected in parallel and stacked.

Technical parameter

Rated operating conditions of SPD modular suction dryer

Compressed air inlet temperature: 2~45 ° C

Compressed air pressure: 0.7MPa, Z height 1.0MPa (SPD01~SPD03Z height 1.6MPa)

Pressure dew point:- twenty

Inlet oil content: 0.08ppm (0.1mg/m3)

Dust particle size in finished gas: ≤ 60um

Average gas flow rate: 15% of rated processing capacity

Adsorbent: Activated alumina+molecular sieve

Pressure drop: ≤ 0.025MPa (under 0.7MPa intake pressure)

Regeneration method: room temperature regeneration

Working mode: automatic switching between two towers for 4 minutes or 10 minutes, continuous operation

Control mode: cycle period adjustable from 4 to 10 minutes

Installation method: Indoor, no foundation installation allowed

Product images